GOAL ZERO NOMAD 100 User Manual

Solar Port
(blue, 8mm, male)
14-22V, up to 8A
(100W max)
General
Weight 10.2 lbs (4.6 kg)
Dimensions (unfolded) 20.5 x 59.5 x 1 in
(52 x 151.1 x 2.54 cm)
Dimensions (folded) 20.5 x 15.5 x 2 in
(52 x 39.37 x 5.08 cm)
Certs
Warranty 12 months
GET TO KNOW YOUR GEAR
Connect a Nomad 100 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Pack by
inserting the 8mm blue-ringed connector into the 8mm input on the units.
8mm Goal Zero Connector
The safest and easiest way to chain Nomad 100 Solar Panels is by using an 8mm to APP Combiner Cable.
This plug-and-play method ensures you safely chain solar panels for recharging Goal Zero Portable Power
Stations.
Charges the following: Approx. Charge time:
Goal Zero Yeti 400 8-16 hrs
Goal Zero Yeti 1250 24-48 hrs
Goal Zero Yeti 1400
Lithium
29-57 hrs
Solar Panel
Rated Power 100W
Open Circuit Voltage Voc 18-22V
Short Circuit Current Isc 8A
Cell Type Monocrystalline
Ports
Nomad 100 Solar Panel
Be sure to activate your warranty at goalzero.com/warranty
TECHNICAL SPECIFCATIONS
HOW TO CONNECT
HOW TO CHAIN
Goal Zero’s 8mm Extension Cables provide greater distance between your solar panels and your power
stations. Purchase these from GoalZero.com.
OPTIONAL CABLES
Goal Zero Yeti
Portable Power Station
Nomad 100
Solar Panel
LaptopHOW IT WORKS
NOTE: Do not plug chained Nomad 100 Solar Panels into the Goal Zero Yeti 150, Yeti 400, Yeti 400
Lithium Portable Power Stations or Sherpa 100 Power Packs as this exceeds their input ratings.

GOAL ZERO NOMAD 100 Specifications

General

Brand	GOAL ZERO
Model	NOMAD 100
Category	Solar panel
Language	English