Need help?Do you have a question about the Goalzero BOULDER30 and is the answer not in the manual?
General| Type | Monocrystalline |
|---|---|
| Power Output | 30W |
| Maximum Power Voltage (Vmp) | 18V |
| Maximum Power Current (Imp) | 1.67A |
| Operating Current | 1.67A |
| Foldable | No |
| Built-in Kickstand | Yes |
| Daisy Chain Capable | Yes |
| Ports/Connector | 8mm |
| Compatible Devices | Goal Zero Power Stations |
Instructions on plugging, securing, powering, and chaining the Boulder 30 solar panel.
Details on bracket holes, chaining port, panel structure, and charging cable.
Diagram illustrating the connection of the Boulder 30 with a solar generator and a laptop.
Confirms the Boulder 30 is waterproof and rugged, cautioning about connected devices.
Details compatibility with Goal Zero power packs and effectiveness with Yeti Solar Generators.
Explains that up to four Boulder 30 panels can be chained together.
Clarifies the 30 Watt output is affected by angle and clouds; not for indoor use.
Addresses the panel's resilience, advising against heavy impacts that could crack the glass.
Lists charging times for Goal Zero Sherpa 50, Yeti 150, and Yeti 400.
Details rated power, voltage, cell type, dimensions, weight, and warranty.
Specifies the solar port type, voltage, and current limits.
To Next Page
