To Next PageTo Next Page
Need help?Do you have a question about the Godox QT Series and is the answer not in the manual?
General| Color Temperature | 5600±200K |
|---|---|
| Modeling Lamp | 150W |
| Triggering Method | Sync cord, Test button, Slave triggering, Wireless control port |
| Voltage | AC100~120V/60Hz or AC200~240V/50Hz |
| Control | Wireless control port |
| Cooling System | Fan |
Warning against internal component access to prevent electric shock or malfunction.
Instructions to keep the device dry to prevent fire or electric shock.
Warning about small parts posing a choking hazard to children.
Advice against leaving the device in hot environments to prevent fire or damage.
Identification of the main physical components of the flash unit.
Details and labels for the flash unit's Liquid Crystal Display panel.
List of included accessories with the flash unit.
List of optional accessories available for separate purchase.
Steps for preparing the flash unit before operation, including lamp and reflector setup.
Explanation of the Manual Flash mode for controlling output and duration.
How flash duration (t0.1) is displayed and its measurement.
Mode for consistent color temperature (±200K), ideal for specific lighting needs.
Mode for capturing fast actions with short flash durations (up to t0.1=1/25640s).
Formula to calculate appropriate shutter speed for stroboscopic flash effects.
Overview of wireless settings for 2.4G radio transmission.
Procedure for setting communication channels to avoid signal interference.
Procedure for setting communication groups for synchronized flash control.
Setting up the flash as an Optical S1 slave for synchronous firing with a main flash.
Setting up the flash as an Optical S2 slave to ignore pre-flashes from the master.
Instructions for controlling modeling lamp brightness, ON/OFF, and custom modes.
Using a remote control to wirelessly adjust flash power and trigger the flash.
Connecting the flash via sync cord for synchronous firing with the camera shutter.
Explanation of the device's memory function for retaining panel settings.
Step-by-step guide for safely replacing the flash tube.
