Need help?Do you have a question about the Godox TT685S and is the answer not in the manual?
General| Type | Slave flash |
|---|---|
| Display type | LCD |
| Product color | Black |
| Flash coverage | 20 - 200 mm |
| Built-in display | Yes |
| Channels quantity | 32 channels |
| Color temperature | 5600 K |
| Shooting distance | 100 m |
| Flash guide number | 60 m |
| Approximate recycling time | 2.6 s |
| Camera brands compatibility | Sony |
| Brand specific flash systems | TTL |
| Battery type | AA |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 64 mm |
| Height | 190 mm |
| Weight | 530 g |
Lists the physical components of the camera flash unit.
Details the display screen and its indicators.
Explains the function of buttons and dials on the unit.
Explains the automatic power-off function and its settings.
Describes how to use the flash in TTL automatic mode.
Explains how to adjust flash exposure compensation in TTL mode.
Details the flash output levels and their corresponding f-stop values.
How to use the flash as an optical S1 slave unit in manual mode.
How to use the flash as an optical S2 slave unit in manual mode.
How to set manual flash for high-speed off-camera use.
Formula and considerations for setting shutter speed with stroboscopic flash.
How to switch between normal and wireless flash modes.
Optimal placement and distance for master/slave units in optical transmission.
How to switch between normal and wireless flash modes for radio transmission.
How to set the flash mode for the master unit in radio transmission.
How to set communication channels to prevent interference.
How to select Manual flash mode for wireless shooting.
How to set the flash output for groups in manual wireless mode.
Instructions for shooting with manual wireless flash.
How to set the flash to Multi stroboscopic mode.
How to set up and shoot with two slave groups.
How to set up and shoot with three slave groups.
Using a remote control to adjust flash power and trigger.
Connecting a sync cord for flash triggering.
How the AF-assist beam works and how to control it.
Extending flash coverage to 14mm with the built-in wide panel.
Lists available custom functions and their settings.
Details protection against overheating and its indicators.
Lists system prompts for device protection and safety.
Solutions for issues related to charging the camera flash.
Troubleshooting steps when the flash fails to fire.
Resolving issues with the flash unit powering off automatically.
Fixes for when the auto zoom function is not operating.
Tips for correcting exposure issues in flash photography.
Troubleshooting illumination issues related to flash coverage.
To Next Page