Godox X1T-C - V12 Firmware Update; V06 Firmware Update; V05 Firmware Update

To Previous Page

Godox 固件说明

V12

1. To support Canon EOS 7D Mark II camera.

2. Double-click the <CH> Button to turn on/off the

modeling lamp of AD600.

3. To add the simplified operation methods.

4. The power output of M/Multi is the same as the

receive end.

2016-03-18

V11

1. To solve the problem that the output of AD360

cannot be set by XTR16 or XTR16S.

2016-01-30

V10

1. To set the minimum power output to 1/256 in the

M/Multi mode (Set C.Fn-05 to on).

2015-12-19

V09

1. To support the second curtain function (Set C.Fn-04

to on, and the range of shutter should be at 30s to

1/30s).

2015-12-12

V08

1. In order to improve anti-interference ability, the

frequency of CH9/CH

12/CH15/CH18/CH21/CH24/CH27/CH30 has been

adjusted. As these 8 channels are not compatible

with the old version, please update the relevant

product.

2015-11-26

V06

1. To solve the problem that some Canon 5D3 cameras

do not fire flashes under GR mode.

2. The updated flash trigger can support Canon 760D

camera.

2015-11-06

V05

1. To solve the compatible problem of flash trigger

and Canon 1DX camera.

2. Add Multi (stroboscopic function).

2015-10-27

Note: For more details, please download the newest instruction manual on the official website