| TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The LED on the front
panel is OFF.
The system is noisy.
| The POWER CORD is
damaged or not plugged
in.
| Ensure that the POWER
CORD is not damaged
and connect it properly to
the power outlet and the
IEC socket on PSU-5.
| The MASTER SWITCH is
OFF.
| The PSU-5 is not correctly
placed.
| The PSU CONNECTION
CABLE is not connected
properly.
The LED does not turn
green when powering
another device.
| Turn ON the MASTER
SWITCH on the rear panel
of PSU-5.
| Ensure that the PSU-5 is
placed to the LEFT HAND
SIDE of the master unit
and possibly at some
distance.
| Ensure that the PSU
CONNECTION CABLE
is not damaged and
connect it properly to
the PSU OUT port on the
PSU-5 and to the PSU
port on the master unit.
7
CLEANING THE UNIT
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit ne aesthetic. Do not
use alcohol.
| The GND is not
connected correctly.
| Connect the GND on the
PSU-5 to the other unit
To Next Page
Loading...