To Next PageTo Next PageWhat to do if my GOLDBRUNN THERM Dryer has no power supply?
If your GOLDBRUNN THERM Dryer isn't getting power, there are several potential causes: * **No voltage in the supply cable:** Inspect the supply cable. * **Incorrectly plugged or damaged supply cable:** Ensure the supply cable is correctly plugged into the mains. Repair any damage to the cable. * **Blown fuse:** Replace the fuse.
Why vacuum does not appear in the chamber of GOLDBRUNN THERM Dryer?
If a vacuum doesn't appear in the chamber of your GOLDBRUNN THERM Dryer, consider the following: 1. **Wrong pump selected:** Ensure the vacuum generation speed is 2 l/s. 2. **Faulty connection:** Inspect or replace connecting elements between the pump and the dryer. 3. **Damaged vacuum meter:** Replace the vacuum meter. 4. **Improperly closed door:** Adjust the door locking pin in the closed position. 5. **Inflexible door seal:** Replace the seal. 6. **Valves in wrong position:** Correct the positions of the air inlet and vacuum valves.
How to fix temperature that does not increase in GOLDBRUNN THERM Goldbrunn 450?
If the temperature in your GOLDBRUNN THERM Dryer isn't increasing, here are a few things to check: * **Setting value too low:** Set an appropriate temperature value of at least RT+10°C (where RT is the ambient temperature). * **Damaged temperature controller:** Replace the temperature controller. * **Damaged heater:** Replace the heater. * **Incorrect timer settings:** Set ST=0 or ST=heating time + temperature time constant.
General| Brand | GOLDBRUNN |
|---|---|
| Model | Goldbrunn 450 |
| Category | Dryer |
| Capacity | 8 kg |
| Energy efficiency class | A++ |
| Noise level | 65 dB |
| Number of programs | 15 |
| Delay start | Yes |
| Child lock | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Weight | 47 kg |
| Type | Condenser |
| Special Features | Anti-Crease |
