KB300 / KB350 with FS560
Translation of the original operating instruction and spare parts list
- 24-
5006892-01
BA-E
®
Error: Engine speed increases when only the throttle trigger is depressed.
• Starting the engine.
• Depress the throttle trigger (Pos. 2). Do not press down the throttle trigger lockout
(Pos. 1).
If the engine speed increases or if the cutting attachment rotates, the throttle cable has
to be adjusted.
• Stopping the engine
Adjusting the throttle cable
Depress the throttle trigger lockout (Pos. 1) and the throttles trigger (Pos. 2) as far as
stop and hold them in that position.
Apply only sufficient pressure to hold the levers against their stops.
• Rotate screw in throttle trigger ½ turn counter clockwise.
• Release the throttle trigger and throttle trigger lockout.
• Start the engine and check the adjustment.
• Shut down the engine and repeat adjustment if necessary.
Have the muffler checked by a servicing dealer for contamination!
4.3 Fixing the machine
4.3.1 Placed on the ground secured by spikes
Place the machine so that pipe base fits tight to the pipe. Back fill or remove material underneath the frame if
necessary.
The pipe base is centering the machine automatically. Secure the ground frame with minimum two ground
frame.
Attention: Attention: If engine running behaviour is still unsatisfactory after servicing the air
filter and adjusting the throttle cable, teh cause may be the muffler.
To Next Page
Loading...