14
User‘s Manual
charging slots.
2. Switch the mode switch to
“REFRESH-Funktion“.
LED 1 shines yellow. The battery will be discharged
completely and charged afterwards. 9V blocks cannot
be refreshed.
Charge a 9V block: 1. Insert the battery into the cen-
tral charging slot with right polarity.
LED 2 shines red. The battery is charging.
Discharge batteries: 1. Insert 2-4 batteries into the
charging slots.
2. Switch the mode switch to
“ENTLADEN“.
LED 3 shines yellow. The batteries are discharging.
This function is not available for 9V blocks.
6 Maintenance, Care, Storage and Transport:
• The device is maintenance-free.
• Always disconnect the mains plug from mains when not in use!
• Use a dry and soft cloth to clean your product. Be careful to
avoid scratches. Use a slightly moist cloth for heavy stains.
Look out for live cables! Do not use any cleaning supplies.
This can cause burns to the materials. Avoid liquid entry to
the device.
• Avoid places with high temperatures, humidity, or places
which can become wet, also during maintenance, care,
storage, and transport.
• Keep the product away from children and store it at dry and
dust-proof places!
• Keep the original packing for transport and to avoid damages.
To Next Page
Loading...
Need help?
General
