Goodseed Tabernacle KiT - Installing the Posts and the Fence

2. Installing the posts and the fence
Begin at the “start” mark and proceed
to the “end” mark as directed.
Pass the cloth through the
slotted posts to the right.
1. Install the rst post - put in the cloth and fasten
it by folding part of it inward, about 1 cm,
to prevent it from coming out. Apply a small
amount of glue on the rst post.
2. For the last post, do the same thing as to the rst
one to make sure it does not come out. Apply a
small amount of glue to hold the cloth material.
Using some glue may help.