Need help?Do you have a question about the GOODWOOD AUDIO AC Interfacer and is the answer not in the manual?
General| Brand | GOODWOOD AUDIO |
|---|---|
| Model | AC Interfacer |
| Category | Recording Equipment |
| Language | English |
Explains the AC Interfacer's ability to combine loop switching and auto-routing for acoustic or electric guitars through effects.
Visual guide illustrating how to connect effect chains, returns, and outputs for electric and acoustic guitars.
Instructions on how to mute outputs using the foot switch, indicated by the LED lighting up.
Guide to switching modes by holding the foot switch for 3 seconds, with LED color changes indicating mode.
Details that both loops are active and the ELEC output is active, while the AC output is muted.
Explains that Loop A is bypassed and the AC output is active, while the ELEC output is muted.
Recommendation for placing electric-only effects like overdrive and distortion in Loop A.
Guidance for placing effects used on both electric and acoustic signals in Loop B.
Specifies 2.1mm barrel, centre negative, 9vDC power only, with a minimum requirement of 100mA.
Details the physical size (width, depth, height) and weight of the AC Interfacer unit.
To Next Page