Need help?Do you have a question about the GOODWOOD AUDIO The TX Interfacer and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Channels | 2 |
| Inputs | 2 x XLR/TRS Combo |
| Ground Lift | Yes |
| Frequency Response | 20Hz - 20kHz |
| Outputs | 2 x XLR |
| Power Source | Phantom Power (48V) |
Explains the Interfacer's role in professional pedalboard setups and signal management.
Details the function and labeling of each numbered input, output, and switch on the device.
Illustrates the typical wiring for connecting the Interfacer to amps and pedals.
Guides on using the passive input for vintage fuzz or wah pedals that dislike buffers.
Instructions for connecting expression pedals or tap tempo switches via the P send/in.
How to use the footswitch for silent tuning, kill switch, and troubleshooting.
How to switch between stereo and dual mono summing modes using the footswitch.
Details using red LED for true stereo or blue LED for mono signal splitting to outputs.
Uses dip switches for mono pedal boards to create a dual mono signal.
Details push buttons for ground lift and phase inversion on the TX version.
To Next Page