Google Nest Cam IQ outdoor - Nest Cam IQ Indoor Installation

2019 | Condential and Proprietary | Do not distribute
Troubleshooting Nest camera error codes
My Wi-Fi network doesn't show up when I try to set up my camera
Step 3: Plug in the camera and connect to Wi-Fi
Plug the camera into a household power outlet with the included power cable and adapter. The camera’s light will
pulse blue to let you know it’s geing power and is ready to be connected.
The app will help the camera automatically scan for nearby Wi-Fi networks. Select the network the customer wants
their camera to use. If the list doesn’t include their Wi-Fi network, if the camera can’t connect to it, or if you get an
error code like NC022 or NC033, see the following aicles for help.
NEST CAM IQ INDOOR INSTALLATION
Place the camera
● Place the camera on a at horizontal suace, like a shelf.
○ Note: Ideally, they’ll want to place the camera high enough to get a
good picture of someone’s face as they walk in front of it. The 130°
wide angle view makes it easy to nd a spot where you can see most
of the room.
● Pivot the camera in its stand to adjust the viewing angle.
● Check the camera’s video stream with the Nest app and make fuher
adjustments.
○ Tip: To help its sensors provide a beer image, angle the camera so
the suace it’s siing on stays out of view.
Finally, add the cable clips where necessary to secure the camera’s power
cord to the wall or ceiling for a tidy look.
Step 4: Check the camera’s video stream
Now that the camera is connected to Wi-Fi, the app will help you check
that the camera can stream video. Make sure the camera is placed exactly
where the customer wants during the test.
● If you see video, you’re ready to install or mount the camera.
● If you don’t see video, the camera may be too far from the Wi-Fi
network. Try moving it closer.