2019 | Condential and Proprietary | Do not distribute
There are three dierent ways you can install the Nest Cam Indoor:
● Place it on a horizontal suace like a shelf
● Use the magnetic base to aach it to a metal suace
● Install the metal plate to mount the camera on a wall or ceiling
Placing the camera on a horizontal suace like a shelf, counteop, or table is easy. Place it where desired
and check the video stream on the Nest app.
NEST CAM INDOOR INSTALLATION
Aaching the camera to a metal suace
There’s a poweul rare eah magnet at the boom of Nest Cam Indoor’s stand, so it will securely aach itself
to metal suaces. You don’t need to drill holes or use the metal mounting plate to do this.
Simply aach Nest Cam Indoor to a refrigerator, a le cabinet, or other metal suace. We do not recommend
aaching the camera to a computer or electronics as this could potentially lead to damage.
Then check the camera’s video stream with the Nest app.
Installing the camera on a wall or ceiling with the mounting plate
● Make sure the location they have picked is close enough to a wall outlet. Try holding the camera where they want
it with the power cable and adapter plugged in. You should have a lile slack just in case.
● Check Wi-Fi coverage on the Nest app. You may need to move it closer for a stronger signal, even if it’s just a few
inches.
● Once video is conrmed, install the mounting plate. Hold the plate against the wall, ceiling, or other suace, and
screw it in. Make sure the cable clip points in the direction you want the cord to go. The screws are self-tapping,
so they’ll install easily in drywall, wood, and plaster without drilling a hole. If you need to drill into hard materials
like concrete or masonry, use wall anchors (not provided)
Impoant: If you need to drill holes, drill only
one to sta with. Place the mounting plate on
the wall so that the hole you drilled lines up
with one of the slots on the plate. Drill the
other two holes using the slots as a guide.
To Next Page
Loading...