2019 | Condential and Proprietary | Do not distribute
Note: If the camera ever needs to be removed from the wall plate, inse the
included hex key into the hole in the base and turn it counterclockwise.
Adjust the view
Make sure the camera is plugged in and connected to Wi-Fi.
Use the Nest app to check the view while you adjust the camera angle. You can
rotate both the hinge and the camera lens 360 degrees. Make sure the Nest
logo is at the boom.
Use the app’s zoom and enhance feature to crop out anything the customer
doesn’t want.
Install the cable
Secure the cable using the included cable clips. You can install as many clips as
needed outside or inside of the home.
For a clean looking installation, try to route the cable along a ledge or corner.
If you routed the cable along the outside of the home and have an exposed hole to
pass the cable inside, be sure to seal the hole with caulk.
Finish up
Remove the sticker on the lens and wipe o any dust or di with a so lint-free cloth.
Impoant: If the cable is being painted to match the home do not paint the camera.
To Next Page
Loading...