Google Nest Protect - Page 9

2019 | Condential and Proprietary | Do not distribute
Tuck any excess wiring into the electrical box rst. Remove the clear plastic dust
cover, hold Nest Protect against the backplate and turn it clockwise. You’ll feel
the tabs drop into place and grip the backplate. Continue turning until it’s square
with the wall or ceiling. Install the rest of the Nest Protects if there are more.
Impoant: If installing multiple Nest Protects make sure they are within 50 feet
of each other to avoid connection issues.
Step 9: Connect power
Plug the 120V connector into the back of the Nest Protect.
Step 10: Install the Nest Protect
Tip: If the customer wants to remove the Nest Protect for cleaning, remind them to rst turn o power to the Nest
Protect at the breaker box or remove the fuse. Then turn counterclockwise until it disconnects from the backplate.
Step 11: Turn power back on
Plug the 120V connector into the back of the Nest Protect.
Step 12: Press to test
Press the buon on the Nest Protect and it will tell you what to do next.
If there is more than one Protect, the others in the home should speak
up and conrm they’re all connected.