Goome WT02A - Page 5

3) Restore Factory Settings
Instruction
Format
Example
Restore Factory default
FACTORY #
FACTORY #
Note:
Restore factory setting, part of settings will restore factory default.
Example:
Send: FACTORY#
Return:
Factory
Reset
OK
4) Reset Device
Instruction
Format
Example
RESET
RESET #
RESET #
Note:
Device will reboot.
Example:
Send : RESET#
Return : System Reboot OK
5) Check Paramaters
Instruction
Format
Example
Query Device Information
PARAM#
PARAM#
Note:
Use this instruction to query device main parameters.
Example
Send: PRARM#
Return:
IMEI:3534XXXXXXXXXXX; (Serial number)
APN:cmnet; (Current APN)
IP:gm02e.szdatasource.com:8841; (Server address and port)
TIMER:10S; (Gap time for location update)
CENTER TEL:0; (Center phone number)
TIME ZONE:8.00 ; (Default TimeZone )
LANGUAGE:EN; (EN – English, CN - Chinese)
LCWL : OFF (Geo fence, notify by SMS)
Mode :2 (Current working mode, default mode2)
Protocol : WT02A (Current Protocol type)
6) Check Working Status
Instruction
Format
Example
STATUS
STATUS#
STATUS#
Note:
Use this message to check the device working status, like GSM, GPRS,
GPS status.