Gooxi RMC4124-670-HS User Manual

Shenzhen Gooxi Hengyu Technology Co., Ltd
Based on the hole of motherboard screw, motherboard active stud (8mm height) is
installed at the corresponding position on the insulation pad. As shown in the figure
below: Install Gooxi G1DE-4B dual circuit motherboard corresponding to the base
hole site.
(2) After the motherboard active stud (8mm height) is installed, place the motherboard
into the chassis and fasten motherboard screw at the hole site. As shown in the figure
below:

Gooxi RMC4124-670-HS Specifications

General

Brand	Gooxi
Model	RMC4124-670-HS
Category	Chassis
Language	English