EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l’ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d’éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d’emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d’étouffement.
Avant de Commencer
02 03
B
H
A
G
I
E
F
C
D
PART INCLUDED:
1: ATTACH THE ANCHOR
HEAVY BAG (A), HEAVY BAG ANCHOR (B), HEAVY
BAG CHAIN (C), CARABINER CLIP (D), HOSE (E),
WATER CONNECTION (F)
Attach the anchor(B) to the Heavy Bag(A) by
removing the screw pin and push the anchor down
around the heavy plastic hole(H) .Place the screw
pin back into the anchor.
2: UNSCREW THE PLUG
Remove the fill plug(G) from the Heavy Bag using
a head screwdriver.
3:FILL THE BAG
Attach the plastic water connection(F) with the
faucet, then insert the hose(E) into the fill hole(I)
and slowly turn on the water to fill the bag.
Place a bucket or towel on the floor under the
Heavy Bag in case of overfill.
5: HANG THE BAG
Secure the bag by attaching the anchor to the
hanging end of the chain(C) with a carabiner clip(D).
Hang the bag to a support beam or free-standing
heavy bag stand.
Your Heavy Bag is now ready to use.
4: SCREW IN THE PLUG
Insert the screw plug and tighten.
To Next Page
Loading...
