To Next PageTo Next PageWhy is my Gorenje SGT 2400 BW not heating up?
There could be several reasons why your Gorenje Iron isn't heating up. First, check the mains cord, plug and wall socket for any connection issues. Ensure the appliance is switched on by setting the on/off knob to ‘on’. Finally, the set temperature might be too low, so try setting a higher temperature.
What to do if my Gorenje Iron is not producing steam?
If your Gorenje Iron isn't producing steam, there are a few potential causes. Make sure the water tank has enough water. Allow the steam generator approximately 2 minutes to heat up sufficiently. The set ironing temperature may be too low; select a temperature of 2 or higher. Ensure the water tank is correctly placed in the steam generator until you hear a 'click'. If the temperature dial is set very high, try lowering it to 2 to see if steam is produced.
Fabric types for optimal temperature settings.
Step-by-step guide to filling the water reservoir.
Procedures for the very first use of the iron.
Step-by-step guide to replace the anti-calc cartridge.
Essential safety guidelines for appliance usage.
Step-by-step guide to filling the water tank.
Steps for replacing the anti-cal cartridge.
General
