Gorilla Playsets Empire Extreme User Manual

™
™
playsets
playsets
Copyright © 2018 Gorilla Playsets
All Rights Reserved
190 Etowah Industrial Court
Canton, GA 30114
www.gorillaplaysets.com
Empire Extreme
Model: 1500MW
(BOXES: 1501, 1504, 1506,
1509N, 1509W, 1514, 1528,
1529, 1535, 1535F, 1537, 7’
Turbo Tube Slide Box, 14’ Scoop
Slide (bagged) & Slide Box)
Stained Post Option
BOXES: 1533, 1534,
1522, 1541
*51-0090-W*
51-0090-W
™
™
playsets
playsets

Gorilla Playsets Empire Extreme Specifications

General

Brand	Gorilla Playsets
Model	Empire Extreme
Category	Play Sets & Playground Equipment
Language	English

Summary

Gorilla Playsets Warranty

Important Safety Guidelines

Weight Limits for Gorilla Playsets

Specifies maximum weight capacities for various play set components and total unit.

Product Registration

Important Documents

Safety and Maintenance Tips

Play Set Surfacing Recommendations

Fort Assembly Guidance

Leveling Your Fort During Assembly

Details the process of ensuring the fort is level and square during setup.

General Information and Definitions

Definitions and Explanations

Explains key terms like offset holes, counter-sunk holes, and lag screws for assembly.

Common Installation Practices

Installing T-nuts

Provides instructions on how to properly install T-nuts into wood components.

How a T-Nut Works

Board Identification

Pre-Drill Lag Screw Directions

Swing Beam Loading

Site Plan

Required Tool List

Kit Contents

STEP 1: ATTACHING T-NUTS TO THE CORNER POSTS

STEP 2: SWING BEAM PLATE

STEP 3: ASSEMBLING THE RIGHT SIDE FRAME

STEP 8: DECK BOARDS

STEP 14: CONNECTOR POSTS

STEP 25: LADDER ASSEMBLY

STEP 29: ROCK WALL

STEP 51: TURBO TUBE SLIDE

STEP 65: HANGING THE SWINGS

STEP 95: MOUNTING THE MONKEY BARS TO THE FORT

STEP 105: SAFETY HANDLES(UPPER/MAIN/LOWER) LEVEL

PART 2: CLATTER BRIDGE ASSEMBLY

Clatter Bridge STEP 1: Attaching T-Nuts to Corner Posts

Installs T-nuts into the corner posts for the tower structure.

Clatter Bridge STEP 4: Deck Supports

Attaches deck supports to the tower frame assemblies.

Clatter Bridge STEP 10: Deck

Installs the deck boards for the clatter bridge.

Clatter Bridge STEP 19: Bridge Deck/Chain Installation

Connects the bridge deck assembly to the playset tower using chains.

Clatter Bridge STEP 28: Attaching Wave Slide

Attaches the wave slide to the clatter bridge tower.