Customer Service:
If you have any questions or concerns regarding your GoSports® Ladder Toss Set, please reach out to us at
info@pandpimports.com and we will get back to you right away. We 100% stand behind our products and want to make
sure you get the full enjoyment that you paid for. Enjoy!
Assembley Instructions:
At GoSports, we pre-assembled as many parts as possible to make the game’s setup easy. In the box, there are PVC
tubes and connectors to assemble 2 targets: One Red Target and One Blue Target. Separate the pipes with connectors
into 2 piles (red and blue).
Starting with the Red Target:
1: First lay out two “T Connectors” on left and right
2: Next lay out two “Elbow Connectors” on top and bottom
3: Connect all four pieces into a square as shown, with the “T Connectors” facing up
4: Now find two Short Pipes and attach to the “T Connectors” so they are standing straight up
5: Attach Blue Scoring Rung (make sure it has the red connectors on the ends)
6: Connect two more Short Pipes
7: Attach Red Scoring Rung (make sure it has the red connectors on the ends)
8: Connect two Score Tracking Pipes between the Red and Yellow Rungs (We find it easiest if the score for both teams
are kept on one target, so insert both scoring pipes on the red target)
9: Finally, place the Yellow Scoring Rung on top to complete the target
Blue Target Setup:
Repeat the same steps for the Blue Target. *Except the Blue Target does not have Score Tracker Pipes, so use the plain
white pipes to complete the Blue Target.
When taking apart the set after playing, keep in mind that the
connectors are glued onto the pipes to make assembly faster.
Only the short white pipes should come free from the
connectors.
Base Setup (Steps 1-3) Rung Setup (Steps 4-9)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
11
2
2
4 4
5
66
7
88
9
To Previous Page
Loading...
Need help?
General
