Gossen MetraWatt DIGISIX 2 - English

GOSSEN Foto- und Lichtmesstechnik GmbH 3
Contents
Page
Preparation, Safety, Warnings, Notes
4
1
The functioning of the exposure meter
8
1.1
Preparation and self-test
8
1.2
Incident light and reflected light
9
1.3
Duration of read-out in display
9
2
The individual functions
10
2.1
Setting the film speed
10
2.2
Exposure measuring ambient light
11
2.2.1
Read-out of the values measured
11
2.3
Flash measurement (only DIGIFLASH 2)
12
2.3.1
Setting the sync speed (measuring time)
12
2.3.2
Measuring
12
2.3.3
Fill-in flashes
13
2.4
Taking a measurement outside the
measuring range
14
2.5
Contrast measurements
15
2.6
Setting correction values
15
2.7
Function TIMER
16
2.8
Watch/Alarm clock
17
2.9
Measuring temperatures
18
2.9.1
Min./Max. temperatures
19
3
Service and repairs
20
4
Technical data
21
The DIGISIX 2 - DIGIFLASH 2 is a small but smart
GOSSEN exposure meter, with digital read-out, for
ambient light; the DIGIFLASH 2 has additional flash
function.
The exposure meter is made to exacting GOSSEN
calibration standards for high precision measure-
ments. The trendy styling and logical functioning
make it easy and comfortable to operate.
Key features:
 Incident and reflected light measuring mode
 Measuring of ambient light
 Measuring of flash light (only DIGIFLASH 2)
 µ P controlled
 Digital LCD display readout in 1/3 stop increments
 Contrast readout in 1/3 EV steps
 Storage of the measuring results
 Indication of all suitable combinations of shutter
speeds and f-stops
 Signal "range over" or "range under"
 Automatic battery check
 Countdown timer for long exposures
 Function Watch/Alarm clock
 Measuring temperatures