Gossen MetraWatt ECUTEST ST BASE - Use for Other than Intended Purpose; Liability and Guarantee; Opening the Instrument; Repairs

Gossen Metrawatt GmbH 7
SECUTEST ST BASE(10) / PRO and SECULIFE ST BASE(25)
Table of Standard Designations for Available Tests
2.2 Use for Other than Intended Purpose
Using the test instrument for any purposes
other than those described in these con-
densed operating instructions, or in the test
instrument’s operating instructions, is con-
trary to use for intended purpose.
2.3 Liability and Guarantee
Gossen Metrawatt GmbH assumes no liabil-
ity for property damage, personal injury or
consequential damage resulting from
improper or incorrect use of the product, in
particular due to failure to observe the prod-
uct documentation. Furthermore, all guaran-
tee claims are rendered null and void in such
cases.
Nor does Gossen Metrawatt GmbH assume
any liability for data loss.
2.4 Opening the Instrument / Repairs
The test instrument may only be opened by
authorized, trained personnel in order to
ensure flawless, safe operation and to
assure that the guarantee isn’t rendered null
and void. Even original replacement parts
may only be installed by authorized, trained
personnel.
Unauthorized modification of the test instru-
ment is prohibited.
If it can be ascertained that the test instru-
ment has been opened by unauthorized per-
sonnel, no guarantee claims can be honored
by the manufacturer with regard to personal
safety, measuring accuracy, compliance
with applicable safety measures or any con-
sequential damages.
If the guarantee seal is damaged or
removed, all guarantee claims are rendered
null and void.
EN 50678 /
VDE 0701
EN 50699 /
VDE 0702
VDE 0701-0702 /
ÖVE E 8701 /
SNR 462638
IEC 60974-4 /
EN 60974-4 /
VDE 0544-4
IEC 62353 /
EN 62353 /
VDE 0751-1
IEC 60601-1 /
EN 60601-1 /
VDE 0750-1
IEC 62368 /
EN 62368 /
VDE 0868-1
IEC 62911 /
EN 62911 /
VDE 0868-911
Single Measurements
Protective conductor resistance 
Insulation resistance 
Protective conductor current 
Earth leakage current 
Primary leakage current 
Device leakage current 
Touch current 
Current from welding circuit 
Patient leakage current 
Leakage current from applied part 
Measuring Method
Alternative (equivalent [device]
leakage current)

Differential current 
Direct 