Gossen MetraWatt METRA HIT 27I User Manual

Name: Gossen MetraWatt METRA HIT 27I
Brand: Gossen MetraWatt
Rating: 5 (1 reviews)

28 pages

To Next Page

Operating Instructions

METRAHIT⏐27 and METRAHIT⏐H+E CAR

METRA HIT 27M: Digital Multimeter and Milliohmmeter

METRA HIT 27I: Digital Multimeter, Milliohmmeter and Megohmmeter

METRA HIT H+E CAR: Mega Tester for Hybrid E-cars

3-349-207-02

12/4.16

Default Chapter3
- Table of Contents3
1 Safety Features and Precautions4
2 Initial Start-Up5
3 Selecting Measuring Functions and Measuring Ranges6
- Automatic Measuring Range Selection6
- Manual Measuring Range Selection6
- Quick Measurements7
4 Triple Digital Display7
5 Measured Value Storage8
- Measured Value Storage - Key Function "DATA" (Hold/Compare)8
6 Saving Minimum and Maximum Values "MIN/MAX" with Time Stamp9
7 Voltage and Frequency Measurement10
- Voltage Measurement [V]10
- Zero Balancing in the 3 V DC Measuring Range10
- Transient Overvoltages10
- Voltage Measurements at above 600 V10
- Frequency Measurement [Hz]11
8 Resistance and Diode Measurements11
- Resistance Measurement (2-Wire Connection) [Ω]11
- Zero Balancing in the 300 Ω and 3 Kω Measuring Ranges11
- Continuity Test During Resistance Measurement12
- Diode Measurements12
9 Milliohm Measurement (4-Pole-Measurement)13
- Compensation of Cable Resistance13
- Measurement with Kelvin Probe KC2713
- Thermovoltage Compensation13
- Milliohm Measurement with 200 Ma or 20 Ma DC [Mω]14
- Milliohm Measurement with 1 a Pulsating Measuring Current [Mω@1 A] (Automatic Thermovoltage Correction in 314
10 Temperature Measurement [°C]14
- (METRA HIT 27I and METRA HIT H+ECAR Only)15
- Preparing for Measurement15
11 Insulation Resistance Measurement [MΩ16
- Insulation Resistance Measurement16
- Ending the Measurement and Discharging16
12 Using the Menus - from the Initial Info Menu to Operating and Measuring Parameters17
- Sampling Rate17
- Saving Measured Values17
- 1Memory Mode - DATA Key Function (See also Chapter 5.1)17
- 2Memory Mode Operation - STORE Menu Function18
- Querying Memory Occupancy - INFO  MEMO/OCCUP18
- Clearing the Memory - MEMO  Clear18
- Activating the Default Values18
- Transmission Mode Operation with RS 232 Interface19
13 Characteristic Values22
14 Maintenance25
- Storage Batteries and Batteries25
- Fuses26
- Housing26
- Device Return and Environmentally Compatible Disposal26
15 Multimeter Messages26
16 Accessories27
17 Repair and Replacement Parts Service, Calibration Center and Rental Instrument Service27
18 Guarantee28
19 Product Support28
20 Recalibration28

Questions and Answers:

Need help?

Do you have a question about the Gossen MetraWatt METRA HIT 27I and is the answer not in the manual?

Gossen MetraWatt METRA HIT 27I Specifications

General

Resistance Measurement	0.01 Ω to 60 MΩ
Continuity test	Yes
Diode test	Yes
Frequency Measurement	1 MHz
Temperature Range	-200 °C to 850 °C
Battery Type	9V

Related product manuals

Gossen MetraWatt METRA HIT 27M

28 pages

Gossen MetraWatt METRA HIT 29 S

80 pages

Gossen MetraWatt METRA HIT 16I/L

30 pages

Gossen MetraWatt MetraHit 28s

8 pages

Gossen MetraWatt METRAHIT X-tra

70 pages

Gossen MetraWatt METRAport 32 XS

28 pages

METRAHIT IM XTRA BT

68 pages

Gossen MetraWatt A2000

52 pages

Gossen MetraWatt METRA HIT 27I User Manual

Table of Contents

Questions and Answers:

Gossen MetraWatt METRA HIT 27I Specifications

Related product manuals