Need help?Do you have a question about the Gossen MetraWatt PROFITEST 2 DIN VDE 0100 and is the answer not in the manual?
General| Brand | Gossen MetraWatt |
|---|---|
| Model | PROFITEST 2 DIN VDE 0100 |
| Category | Test Equipment |
| Language | English |
Guide on how to install or replace the instrument's batteries.
Instructions for setting language, basic functions, and sub-functions.
Procedure for checking the battery status of the PROFITEST 2.
Steps for recharging the rechargeable batteries using the designated charger.
Guidance on how to properly connect the PROFITEST 2 to electrical systems.
Information on automatic operational settings, monitoring, and shut-off features.
Explanation of how measurement values are displayed on the instrument's screen.
Procedure for testing earthing contact sockets for correct connection.
How to access the instrument's built-in help function for diagrams and information.
How to measure alternating voltage between Line and Neutral.
Measuring voltage between different conductor pairs.
Measuring voltage between the probe and protective earth.
How to measure current using an optional clip-on current transformer.
Measuring contact voltage and performing RCD tripping tests.
Procedures for special RCD tests in different systems and for special RCD types.
Performing RCD tests with adjustable currents and in IT systems.
Testing residual current circuit breakers in TN-S electrical systems.
Measuring loop impedance using positive or negative half-waves.
How to evaluate the results of loop impedance measurements.
Detailed steps for measuring loop impedance.
Testing energy meters using a specific adapter.
Testing energy meters using an earthing contact adapter.
Procedure for measuring earthing resistance using a probe.
Method for measuring earthing resistance when a probe cannot be used.
Interpreting the results of earthing resistance measurements.
Measuring insulation resistance with an increasing test voltage.
How to interpret insulation resistance measurement results.
Configuring the limit value for insulation resistance tests.
Performing low-value resistance measurements on conductors.
Compensating for the resistance of extension cables used in measurements.
Calculating cable lengths based on measured resistance.
Setting the limit value for low-value resistance measurements.
Main display area for measurements, diagrams, and messages.
Primary keys for navigation, function selection, and starting measurements.
Visual indicators for instrument status, connection, and measurement results.
Rotary switch to select basic measurement functions.
Includes test plug, adapters, probes for connecting to the system.
Procedure for running the instrument's internal self-test.
Information on battery usage, care, and charging procedures.
Details on fuse types, replacement, and protection.
Guidelines for cleaning and maintaining the instrument's housing.
Instructions for proper disposal of the instrument and batteries.
To Next Page
