Gossen MetraWatt PROFITEST INTRO - Creating Structures (Example for Electrical Circuit)

GMC-I Messtechnik GmbH 39
Distributor Structure Symbology / Tree Structure
14.3.1 Creating Structures (example for electrical circuit)
After selection with the MEM key, all setting options for the cre-
ation of a tree structure are made available on three menu pages
(1/3, 2/3 and 3/3). The tree structure consists of structure ele-
ments, referred to below as objects.
Select the position at which a new object will be added.
Use the keys in order to select structure elements.
Change to the sub-level with the  key.
Go to the next page with the >> key
Creating a New Object
Press the key in order to create a new object.
Show measurement data, if a measurement has
been performed for this structure element.
Edit the selected structure element.
Memory menu, page 3 of 3
Search for ID number
> Enter complete ID number.
Search for text.
> Enter full text (complete word).
Search for ID number or text.
Continue searching.
Edit menu
Cursor LEFT:
Select an alphanumeric character
Cursor RIGHT:
Select an alphanumeric character
ENTER: accept an individual character


Acknowledge entry
Scroll left
Scroll right
Delete characters.
Switching amongst different types of alphanu-
meric characters:
A Upper case letters
a Lower case letters
0Numbers
@ Special characters
Symbol Meaning
Distributor
A check mark to the right of a structure element means that all measurements
within the respective hierarchy have been passed.
x: At least one measurement has not been passed.
No symbol: Measurement has not yet been performed.
Building
Customer
RCD
Circuit
Equipment
Same type of element as in the Windows Explorer:
+: sub-objects available, display by pressing .
–: sub-objects are displayed, hide by pressing .
Equipment
Scroll up
Scroll down
Acknowledge selection /
Display object
Nextpage
change level
or ID number
Create object
Delete object
VA: show measurement data
Edit designation