LED, LCD and
OFFSET, brightness/contrast menu
Software revision level
Calibration date
Display: date / time
Display: automatic shutdown
Display: automatic shutdown
of display illumination after 20 s.
of the tester after 120 s.
Time, language, profiles
1
2
3
4
Battery test
0b
0a
0
Return to main menu
MAINS LED: test green
MAINS LED: test red
LIMIT LED: test red
Cell test
Inverse cell test
Hide all pixels
Show all pixels
Acoustic signal test
1
Return to main menu
OFFSET submenu
Brightness/contrast submenu
Set time
Profiles for
Default settings
distributor structures
User interface
language
3
3a
3b
3c
3d
3e
Set date
Duty cycle for display
illumination / tester
0b
Return to submenu
0a
Display Illumination On-time
OFFSET, Brightness and Contrast Settings Time, On-Time and Default Settings
Menu Selection for Operating Parameters
LED Tests LCD and acoustic signal tests
Test Instrument On-Time
Select inspector
3h
3f
5
No automatic shut-down,
continuously on
DB MODE submenu
3g
Current inspector
acoustic signal test menu
To Next Page
Loading...
