Gossen MetraWatt SECUTEST PRO - Page 14

14 GMC-I Messtechnik GmbH
Printer Functions – Selection and Settings Using the Thermal Printer as an Example
Note
Report Designer PC software is no longer supported as of
firmware version 2.1.1. The test report can now be edited
and a company logo can be added to it (only with thermal
printer Z721S) directly in SETUP at the test instrument
(see above).
Select the connected printer
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
PRINT
ESC
HELP
MEM
Retrieval of information or settings
Setting parameters
PRINT
ESC
HELP
MEM
Setup 2/3 > Printer
Setup 2/3 > Printer > Z721S
Thermal Printer > Settings1/2
Thermal Printer > Settings 2/2
Z721E * printer: Barcode label printer
Printer info / printer settings
* For testing instrument firmware as of 1.8.3
Z721D * printer: Printer info / printer settings
*Phase-out model
Z721S printer: Printer info / printer settings
Printer settings:
Parameters depend on printer type
Printer info: Name, status, type
Switch to page 2/2
Visual inspection details: show/hide
Signature field: show/hide
Location information: show/hide
Delete a (company) logo previously loaded from a
USB flash drive (see Settings 2/2).
Load and display a logo from a USB flash drive
Switch to page 1/2
Load a (company) logo from an inserted USB flash
drive: Selection list is displayed
Display the currently loaded logo.
Prerequisites for loading a logo:
Format: BMP, JPG, PNG or GIF, resolution: max.
800 x 800 pixels. Color depth: max. 24-bit.