5.3 Start switch (No. 2 in Figure 6)
When the electric door lock switch is opened, the power switch is in the
"OFF" state, press the start switch, the car can move normally. When the
start button is in the off state, the meter gear will display 'P'.
5.4 Gear switch（No.3 in figure 6）
The gear switch has two states. When the gear switch button is pressed, it
is in reverse gear, the instrument gear shows "R", and the car moves
backward; When the gear switch button pops up, it is in forward gear, the
instrument gear shows' D ', and the car moves forward.
5.5 Safety emergency flameout switch (Figure 7)
The safety emergency extinguishing switch is fixed on the right side of the
handlebar, which has a red head, and the tail of the head is connected to a
safety cord. When there is an emergency that makes the vehicle power off,
you can hold the safety rope by hand and pull off the head. At this time, the
circuit is cut off and the motor no longer provides power. If you need to
continue using the car, put the red head back in place. After the head is
removed, the starting switch of the vehicle (No. 2 in Figure 6) is in the off
state, and 'P' is displayed in the instrument file. So when the head is put
back in place, it needs to start the car to be used normally.
（Figure 7）
1.Safety emergency flameout switch 2. Dial accelerator 3.Accelerator
limit screw
To Next Page
Loading...