5.1 Electric door lock switch
The electric door lock switch has two gears. When the switch is in the "OFF"
position, the ATV is not energized. If you want to start the ATV, just insert
the key and turn it clockwise to the "ON" position. When the ATV stops
running, turn to the "OFF" position and pull out the key to prevent
non-owners from starting the ATV; (Figure 5)
(Figure 5)
5.2 Power off switch (No. 1 in Figure 6)
The power OFF switch is located ON the moving function switch on the left
side of the handlebar, "on" represents power off, "off" represents power
on;
(Figure 6)
1. Power off switch 2.Power on switch 3.Gears 4.Rear Brake