To Next PageTo Next Page
Need help?Do you have a question about the Grace NP-P15 and is the answer not in the manual?
P.F.I. standards for wood pellet quality and specifications, including fines, bulk density, size, ash, and heat content.
Details on wood pellet size, acceptable diameter, length, moisture content, and potential issues like clinkering.
Guidelines on fuel type, ash content, prohibiting cordwood, and preventing soot formation for safe operation.
Detailed performance data for different stove models like NP-P15, NP-P01, NP-PS, and NP-PI.
Available color options for the stove's sides and doors.
Diagram and list of major stove components including hopper, auger, igniter, and control board.
Details on the auger motor function and safety switches like over-temperature and convection blower switches.
Guidelines for grounding and connecting the stove to the power supply, including voltage and amperage.
Instructions for installing air intake and venting pipes, including diagrams for different configurations.
Specific rules and recommendations for terminating the vent pipe safely and effectively, including clearances.
Examples of installing the stove with different venting configurations like masonry chimney, fireplace, or vertical.
Special requirements and considerations for installing the stove in mobile homes.
Information on thermostat installation and important safety/repair cautions for the appliance.
Steps for the initial ignition, including priming the fire pot and starting the stove for the first time.
Step-by-step guide for operating the stove, including fan and pellet feeding sequences.
Procedures for safely turning off the stove and operational safety guidelines related to temperature.
How to use the ON/OFF key to control the stove's power state and view status messages.
Step-by-step display messages ('Cleaning', 'Feeding', 'Lighting') during the stove's start-up phase.
Process of flame stabilization after startup and the switching off phase with 'SWITCHING OFF' message.
How to adjust the flame power level (P1 to P4) to control heat output using the feed quantity key.
Explanation of the Eco stage for energy saving and selecting automatic/manual programs.
How to set the target room temperature for the stove's automatic operation using specific keys.
Configuration of clock time, cleaning cycle intervals, and combustion fan speed settings.
How to set weekly programmable schedules for switching the stove on and off at pre-fixed times.
Interpretation of error messages like 'Press Erro' and 'Fire Erro' displayed on the control panel.
Overview of buttons and functions available on the remote control for operating the stove.
Procedures for cleaning the burn pot after use and cleaning the stove's glass door.
Steps for safely removing and cleaning the ash drawer and the combustion blower.
How to clean the internal passageways for flue gases to ensure proper exhaust flow.
Methods for cleaning the convection blower's blades and the exhaust vent pipe.
Recommended cleaning intervals based on pellet usage and procedure for heat resistor replacement.
A guide to identifying and resolving common operational problems with the stove using a table format.
Notes on using the stove with an electrical generator and potential compatibility issues.
Details of the product warranty period, coverage for defects, and limitations on improper operation.
A schematic diagram illustrating the stove's electronic components, power supply, and control connections.
General