Grace Q'nique 15 User Manual

37
1. Using the Hand Wheel in the back of your machine, rotate your machine until the Needle Bar is in
the lowest position.
2. Attach your Hopping Foot to the press bar using a M3 Thumb Screw (don’t tighten during this step)
Hopping Foot
Tools Needed:
3mm T-Handle
Allen Wrench
Hopping Foot
Height Gauge
M3 Thumb
Screw
Press Bar
Needle Plate
Hopping Foot

Grace Q'nique 15 Specifications

General

Brand	Grace
Model	Q'nique 15
Category	Sewing Machine
Language	English