54
Securing Child
Backless Booster
5-E
Using Belt Positioning Clip
1. Make Sure Vehicle’s Seat Shoulder Belt
Lays in the Red Zone As Shown
If the vehicle’s seat shoulder belt lays outside
this zone, you MUST use the belt positioning
clip. Do not use the belt position clip if the belt
is already laying inside this zone.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST
be attached to the slot on the bottom of the
base. Insert the loop end of strap through the
slot on bottom of seat exactly where shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop
end as shown and pull strap up.
To Next Page
Loading...
