Graco PD160487 - Page 5

Operation
4O,ISTEN4O"ABY
s4URNON.URSERY5NITUSINGTHE/./&&SWITCH
s4URNONONEORBOTH0ARENT5NITSUSINGTHE/./&&SWITCH
s!DJUSTTHEVOLUMEONTHE0ARENT5NITBYPRESSINGTHE6OLUME5P$OWNBUTTONS.OTETHATTHE3OUND,IGHTS,%$S
illuminate as the volume button is pressed up or down to provide a visual feedback for the volume level. The unit will beep
louder or softer depending on the volume level.
s4HE3OUND,IGHTSONTHE0ARENT5NITWILLILLUMINATEASYOURCHILDOROTHEROBJECTSMAKENOISENEARTHE.URSERY5NIT0LEASE
NOTETHATTHE3OUND,IGHTSANDVOLUMECONTROLONTHE0ARENT5NITAREINDEPENDENTOFEACHOTHER7ITHTHEVOLUMETURNEDALL
THEWAYDOWNTHE3OUND,IGHTSWILLSTILLILLUMINATEASYOURCHILDOROTHEROBJECTSMAKENOISENEARTHE.URSERY5NIT
5
6IBRATION!LERT&EATURE
1.To turn on the Vibration Alert Feature, set the switch on the side of the parent unit to on.
4OADJUSTTHELEVELATWHICHTHEVIBRATIONALERTISACTIVATEDPRESSANDHOLDTHEh6IBEvBUTTONONTHESIDEOFTHEPARENT
unit. The sound lights will illuminate to show the vibration alert adjustment setting. Press the volume UP/DOWN switch
TOCHANGETHESETTING!LOWERSOUNDLIGHTSETTINGWILLMAKETHEVIBRATIONACTIVATEFORQUIETERSOUNDS!HIGHERSOUNDLIGHT
setting will make the vibration activate for louder sounds. When the sound in the nursery goes above the sound light level
you choose, the vibration alert will be activated.
2ELEASETHEh6IBEv"UTTON