To Next PageTo Next Page
Need help?Do you have a question about the Graco SLIMFIT LX and is the answer not in the manual?
General| Headrest | Yes |
|---|---|
| Coloration | Monochromatic |
| Mounting type | ISOFIX |
| Product color | Black, Grey, White |
| Car seat group | 0+/1/2/3 (0 - 36kg; 0 months - 12 years) |
| Recommended gender | Boy/Girl |
| Belt fastening type | 5-point |
| Maximum weight capacity | 36 kg |
| Number of headrest positions | 10 |
Weight and Dimensions| Depth | 582 mm |
|---|---|
| Width | 427 mm |
| Height | 855 mm |
| Weight | 8870 g |
Emphasizes reading the entire manual before initial use for safety.
Critical warning to understand manual and vehicle manual before installation/use.
States the system is only for car seats with 3-point seat belts.
Prohibits use on front seats with active frontal airbags.
Prohibits removing child from car seat during transit.
Prohibits leaving children unattended in the car seat.
Prohibits unauthorized modifications and use of non-manufacturer parts.
Mandates replacement of the car seat after any significant impact.
Restricts use to designated load-bearing points for installation.
Stresses the importance of correct installation using the vehicle belt as per instructions.
Explains that following instructions minimizes the risk of severe injury or death.
Prohibits use without properly installed soft goods (harness covers, pads).
Warns that parts can become hot in sun, potentially burning child's skin.
Advises against using used or unknown-history restraints due to safety risks.
Details weight limits (0-13kg) and rear-facing requirement for infants under 9kg.
Details weight limits (9-18kg) for forward-facing installation.
Details weight limits (15-36kg) for booster mode.
Specifies weight limit (0-13kg) and mandatory rear-facing for infants <9kg.
Details the installation method using a 3-point vehicle seat belt.
Warns of potential pinch hazards during adjustment or installation.
Instructs to thread the vehicle lap belt through the rear-facing belt path.
Guides on threading the shoulder belt through the rear-facing guide.
Instructs on how to tighten the vehicle seat belt to secure the car seat.
Instructs on correct harness strap placement above the child's shoulders.
Sternly warns against using ISOcatch system exclusively.
Advises ensuring the seat belt is flat, not twisted, and aligned with the buckle.
Instructs on buckling the harness straps and checking for a secure click.
Explains how to check correct harness height for rear-facing installation.
Explains how to check correct harness height for forward-facing installation.
Warns about pinch hazards and the importance of the buckle click sound.
Reinforces the requirement to use booster mode for children over 18kg.
Prohibits using only the lap belt to secure the child.
Emphasizes seat belts must be flat, not twisted, and correctly positioned.
Warns against placing the shoulder belt under the child's arm or back.
Instructs to position the lap belt low across the child's hips snugly.
Guides on centering the shoulder belt between the child's neck and shoulder edge.
Advises adjusting headrest height to achieve ideal shoulder belt position.
Warns that loose or twisted belts, or incorrect lap belt placement, can cause severe injury or death.
Warns against installing on seats that cannot be fixed securely or have damaged belts.
Prohibits rear-facing installation on seats with active front airbags.
Specifies compatibility with 3-point vehicle seat belts meeting standards.
Lists incompatible seat belt types, including 2-point belts.
Prohibits installation with seat belts retracting from top and bottom.
Lists automatic device seat belts as incompatible.
Reiterates that incorrect usage can cause severe injury or death.
Advises using ISOcatch and 3-point belt, not ISOcatch alone.
