Graco SNUGRIDE 30 LX - Page 39

3 Rear
Facing
39
2. Route the Vehicle
Seat Belt
Thread vehicle seat belt
through the rear-facing
belt path (marked with
a label) and buckle it.
The seat belt should
not be twisted.
If your shoulder belt
is long enough, you
may route the shoulder
belt behind the seat as
shown.
3. Lock the Vehicle
Seat Belt
In most vehicles today,
slowly pull the shoulder
belt all the way out
and then let it go back
in. You will hear a
“clicking” sound. Slowly
pull out on the belt and it
should be locked. If not,
review your car’s owner
manual and section 6-D.