Graco SnugRide Click Connect 35 User Manual

27
1. Place the infant restraint without base in a rear-facing
position in a vehicle seat.
2. Thread the lap belt or lap portion of a lap/shoulder belt under both
vehicle belt hooks:
3. Buckle the vehicle belt.
4. Tighten the vehicle seat belt.
To create a secure installation, push
down hard with your free hand on
the infant restraint and pull and
tighten the vehicle belt.

5. Check infant restraint is level: Red level
line on the warning label MUST be
level with the ground .
6. Test infant restraint for secure
installation as described in infant
restraint “Final Safety Check” page 42.
Lap Belt


Lap/Shoulder
Belt

Graco SnugRide Click Connect 35 Specifications

General

Type	Infant Car Seat
Child Weight Capacity	4-35 lbs
Weight Limit	35 lbs
Removable Seat Cover	Yes
Height Limit	32 inches
Compatibility	Graco Click Connect Strollers
Safety Features	EPS Energy Absorbing Foam
Canopy	Adjustable