Graco TURBOBOOSTER 2.0 LX - Page 40

40
4 Securing
Child
Using Belt Positioning Clip
1. Make Sure Vehicle’s Seat Shoulder Belt Lays in
the Red Zone As Shown
If the vehicle’s seat shoulder belt lays outside this zone,
you MUST use the belt positioning clip. DO NOT use the
belt positioning clip if the shoulder belt is in the red zone.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST be attached to
the slot on the bottom of the base. Insert the loop end
of strap through the slot on
bottom of seat exactly where
shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end as shown
and pull strap up.