Graco Turn2Me - 3-C Install Rear-Facing with Vehicle Seat Belt

57
Rear Facing with Seat Belt
3-C
3-C Install Rear-Facing with
Vehicle Seat Belt
1. Store Tether and Lower Anchor Connectors in
Storage Locations
Attach tether hook to the slot on the back or side
of the car seat and remove the slack.
Store the lower anchor connectors in the storage
compartment in the seat base.
Visit www.gracobaby.com
and the Graco
®
Turn2Me
TM
3-in-1 Car Seat product
page to view installation
videos.