Gradient bigoldern3 - Specifications of Materials

3.
2.3. Specicaons of materials
Canopy Fabric Finish Weight
Upper sail-leading edge Skytex 40 Everlast 40 g/m2
Upper sail-rear part Skytex 38 Universal 38 g/m2
Boom sail Skytex 32 Universal 32 g/m2
Ribs Skytex 40 Hard 40 g/m2
Non-carrying ribs Skytex 32 Hard 32 g/m2
Diagonals Skytex 40 / Skytex 32 Hard / Hard 40 g/m2 / 32 g/m2
Reinforcements Scrimm F02 420 X15A 180 g/m2
Reinforcements 060981450YET001 Scky laminate 60 g/m2
Reinforcements Hahl Nylon 6, 2/1200 Ø 2 mm
Lines Finish Diameter Strength Material
Liros DC 100 uncovered 0.7 mm 100 daN Dyneema
Liros DC 120 uncovered 0.8 mm 120 daN Dyneema
Cousin Vectran 16140 uncovered 0.7 mm 80 daN Vectran
Cousin Vectran
16330
uncovered 0.9 mm 100 daN Vectran
Edelrid 7850-100 covered 1.1 mm 100 daN Dyneema/PES
Edelrid 7850-130 covered 1.3 mm 130 daN Dyneema/PES
Edelrid 7850-160 covered 1.4 mm 160 daN Dyneema/PES
Edelrid 7850-200 covered 1.6 mm 200 daN Dyneema/PES
Edelrid 7343-190 covered 1.5 mm 190 daN Aramid/PES
Edelrid 7343-230 covered 1.8 mm 240 daN Aramid/PES
Edelrid 7343-280 covered 2.0 mm 280 daN Aramid/PES
Edelrid 7343-340 covered 2.1 mm 280 daN Aramid/PES
Edelrid 7343-420 covered 2.2 mm 280 daN Aramid/PES
Risers Fabric code Width Strength Material
Webbing 15 mm 850 daN PAD
Webbing 22 mm 1250 daN PAD
Pulleys Paray Al
Pulleys Rilay PAD
Karabiners Maillon Rapide Ø 3.5 mm 750 daN Steel