Coffee Grinder CM 90
EN
28
■ Press and hold down the ‘UN-
LOCK’ button at the rear of the
motor base and with the other
hand turn the grind adjustment
collar anti-clockwise until the
graphic arrow on the collar is
aligned with the arrow on the
motor base.
■ Lift out the top burr from the
grind adjustment collar using
the handle. Clean using the burr-
cleaning brush.
■ Lift the grind adjustment collar
away from the motor base and
clean with the brush.
■ Clean the bottom burr using the
burrcleaning brush.
■ Once both burrs are cleaned, re-
turn the grind adjustment collar
to its position in the motor base.
■ With the grind adjustment collar
in hand align the arrow on the
collar with the arrow on the rear
of the motor base, press downl.
■ Replace the top burr back into
position in the grind adjustment
collar and turn clockwise to the
desired grind setting.
To Next Page
Loading...
