26
Cleaning
Turn the refrigerator off by pressing the upper button O (2) and
disconnect the power supply to the fridge/freezer.
The cabinet is best cleaned using a weak soap solution and a soft
cloth. Never use cleaning agents that scour. It is also highly
recommended that harsh cleaning agents are not used to clean
the plastic components as certain chemicals can lead to premature
deterioration and cause damage to these parts. Clean the sealing
strip around the door regularly to prolong its life. Use only clean
water for cleaning the sealing strip.
The plastic parts of the cabinet cannot
withstand boiling water (max 85ºC).
It is important to prevent water from
getting into the control panel.
Clean the water drain in the
“evaporation tray” in the refrigerator
compartment using the cleaning pin in
the parts kit supplied (32).
Remove dust and threads from the
compressor compartment at the back of
the fridge/freezer with a vacuum cleaner.
Cleaning of doors in stainless steel or aluminium
Stainless steel or aluminium doors on GRAM products can, with
advantage, be cleaned with a spray and a soft cloth. There are a
number of different spraying agents for this purpose on the
market. We recommend that you contact your usual white goods
supplier for advise on the advantages and disadvantages of the
individual products.
32
To Next Page
Loading...
Need help?
General
