Grammer MSG 90.6PG - Page 154

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.12 Bowden pull wire for backrest adjustment –
inspection and adjustment
Page 5 of 5
INSPECTION ADJUSTMENT TABLE OF CONTENTS
4 Lock/unlock the backrest (8) several
times and check the adjustment on
both sides, readjust if necessary.
5 Install the rear covering
(see Chapter 3.5).
6 Install the left covering (13)
(Chapter 3.4).
7 Install the seat cushion (Chapter 3.1).
2196
5
4
3
7
6
1,2
13
12
11
10
9
8
12