Grammer MSG 90.6PG - Page 189

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.19.1 Heater switch – removal and installation
Page 2 of 2
RAISE/ATTACH TABLE OF CONTENTS
Removal and installation
3 Disconnect the electrical connection
(B) between the connector (3) and
heater switch (1).
4 Compress the springs (arrows) at the
heater switch (1) and pull out heater
switch (1) from the left-hand
covering (2).
5 Re-install the components in the
reverse order of their removal.
2186
3
2
1
3
1
1
2
2
B
B