IN-WALL MOUNTING KIT
2
OVERVIEW
The In-Wall Mounting Kit is available for use with the GDS3705 and GDS3710. This mounting kit allows the GDS
door phones to be flush mounted within a wall rather than on the surface of the wall. It supports solid wall, stud and
drywall (hollow wall) installation. When installing any GDS series device or the In-Wall Mounting kit, please follow
local building and electrical code. The device is suggested to be installed with the bottom of the device 50-55 inches
above the ground.
Please refer to the Masergy and Grandstream websites for more updated Online Documents like:
Masergy QIG: GDS3705 Quick Installation Guide GDS3710 Quick Installation Guide
User Manual: GDS3705 User Manual GDS3710 User Manual
FAQ: Grandstream Facility Access Systems
To Next Page
Loading...
