Wiegand Input Example with 3 party Power Supply
Make sure to connect the GND of the Wiegand device and the GDS3710 Wiegand port.
For Wiegand input mode, LED and Beep pins require that the Wiegand device support those interfaces. These two pins will not affect the Wiegand
bus when not connected.
Input example with power supply for both GDS371x and Wiegand device
Wiegand Input Example with Power Supply for GDS3710 and Wiegand Device
If power source is 12VDC, Wiegand device can share same power source of GDS3710. However, users need to check the max power consumption
and the max capability of the power source.
If Wiegand device is using 5VDC, GDS3710 Wiegand port can provide 5VDC with max 500mA to power up Wiegand device.
Output example with 3 party power supply for Wiegand device
rd
rd
To Next Page
Loading...
