~1~
~2~
OVERVIEW
The GWN7602 is a 802.11ac wireless access point. It oers dual-band
2x2:2 technology and a sophisticated antenna design for ideal network
throughput and Wi-Fi coverage range. Three 100M Ports provide IP
Phones, IPTV, PC and etc. with Ethernet, and an uplink Gigabit network
port with PoE/PoE+. To ensure easy installation and management, the
GWN7602 supports to be managed by GWN series APs(except GWN7602)
with embedded controller or GWN.Cloud Management System. With
support for advanced QoS, low-latency real-time applications, up to 80
client devices, combining with the features of Mesh, Captive Portal, the
GWN7602 is an ideal wireless access point for small sized business,
coee shops, restaurants, and hotel deployments.
PACKAGE CONTENTS
GWN7602 PORTS
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of 0 °C to
40 °C for operating and -10 °C to 60 °C for storage.
• Do not expose the GWN7602 to environments outside of the following
humidity range: 10-90% RH (non-condensing).
• Do not power cycle your GWN7602 access point during system
boot up or rmware upgrade. You may corrupt rmware images and
cause the unit to malfunction.
EN
Port Description
Power adapter connector.
(DC 12V,2A)
Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE/PoE+.
1x 10/100M Ethernet port.
2x 10/100M Ethernet ports with PSE.
GWN7602 Access point
1x Quick Installation
Guide
2x Screws
(PA3.5*20)
2x Screws Anchors
Notes:
• If GWN7602 is powered by POE+ or the optional DC(12 V
,2A) PSU
that can be provided. it will support LAN2&LAN3 for PSE.
• If input is PoE, GWN7602 will only support LAN3 for PSE.
POWERING AND CONNECTING THE GWN7602
12V
Option A:
Power Adapter to AC
outlet.
Option B:
RJ45 Ethernet Cable
to PoE/PoE+ switch.
The GWN7602 can be powered either using the right PSU (DC12V, 2A)
or using a PoE/PoE+ switch:
To Next Page
Loading...
