Grandstream Networks GWN7605 User Manual

~ 3 ~ ~ 4 ~
Wall Mount
1. Position the mounting bracket at the desired location on the wall with
the arrow pointing up.
2. Use a pencil to mark the four mounting holes (screw holes DIA
5.5mm, reticle hole DIA 25mm).
3. Insert screw anchors into the 5.5 mm holes. Attach the mounting
bracket to the wall by inserting the screws into the anchors.
Plastic expansion
bolt
PA3.5X20
Screw
Wall
4. Connect the power cable and the ethernet cable (RJ45) to the
correct ports of your GWN7605.
5. Align the arrow on the GWN7605AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is rmly seated
on the mounting bracket.
6.Turn the GWN clockwise until it locks into place and ts the locking
tab.
4
5
6
Ceiling Mount
Note: Ceiling mounting is recommended for optimal coverage
performance.
1. Remove the ceiling tile.
2. Place the ceiling backing plate in the center of the ceiling tile and
mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole
DIA 25mm).
3. Insert the screws through the mounting bracket.
4. Connect the Ethernet cable (RJ45) to the correct ports of your
GWN7605.
5. Align the arrow on the GWN7605AP with the arrow on the locking
tab of the mounting bracket and ensure that your GWN is rmly
seated on the mounting bracket and connect the network and power
cables.
6. Turn the GWN clockwise untill it locks into place and ts the locking
tab.
1
2
3
M3 Nut
Ceiling Mounting
Bracket
M3.0X50
Screw
4
5
6
1
2
3

Grandstream Networks GWN7605 Specifications

General

Brand	Grandstream Networks
Model	GWN7605
Category	Wireless Access Point
Language	English