~7~ ~8~
Step 5: Double click on the detected device. The
default browser(Firefox in this example) will
open to display the camera’s webGUI.
Step 6: A pop-up window will prompt for user
name & password. The factory default value
of administrator username and password are
both set to “admin”
Step 7: Once log into the webGUI, the browser will
indicate that Active-X or Video Plug-in
is required. Follow the displayed instruc-
tion to download and install it.
Step 8: If downloading or installing is unsuccessful
due to browser’s security setting or slow
internet connection, please download the
les from the link below. Save and install the
program then restart the browser. The video
will appear embedded inside the browser’s
web interface.
• Plug-in:
http://www.grandstream.com/products/tools/
surveillance/webcontrl_plugin.zip
Step 9: Here is an example screenshot with the
successful Active-X or Plug-in installation.
Click “Play” button to view the video feed.
Step 10: Click icons and menus on the left side
of web interface for more detailed and
advanced conguration.
To Next Page
Loading...